DINITROL 77B

Corrosion protection for open surfaces

500ml aerosol

Product Description
Cavity product can also be used for storage, transport & underbody protection
Dinitrol 77 B is a corrosion preventive fluid, designed for long-term protection against corrosion and, due to its residual hard film affords some protection against mechanical wear. Dinitrol 77 B contains environmentally acceptable low aromatic solvents, which once evaporated leaves a thick, brown waxy film. Dinitrol 77B is primarily designed for cavity protection but may also be used for storage, transport and underbody protection. 

Characteristics
> Brown
> Thin abrasion resistant
> Waxy
> Tack-free
> Wide range of applications
> Easy to use

Applications
DINITROL 77B is a corrosion preventive fluid, designed for long-term protection against corrosion and, due to its residual hard film affords some protection against mechanical wear. DINITROL 77B contains environmentally acceptable low aromatic solvents, which once evaporated leaves a thick, brown waxy film. DINITROL 77B is primarily designed for cavity protection but may also be used for storage, trans-port and underbody protection.

Method of Use
DINITROL 77B can be applied using manual and semi-automatic application equipment to a clean dry substrate and is suitable for either airmix or airless spraying. Application temperature for product and object is recommended to be 15 − 30°C.

Specifications
> Colour: Brown
> Type of film: Hard, waxy
> Density at 23°C: 860 kg/m³
> Viscosity at 23°C (DIN 4): 25s
> Dry matter content: 55% by weight
> Flash point: 29°C
> Aromatic content in solvent: < 0.5%
> Rec. film thickness: 50 μm
> Drying time: 30 min
> Effect on car paint: None
> Low temperature adhesion: – 30°C
> Heat resistance: 105°C
> Salt spray test: 500 hrs
> Penetration: 30mm minimum